A 6-DOF humanoid wall-climbing robot with flexible adsorption feet based on negative pressure suction

A wide range of dangerous and special tasks have witnessed the applications of wall-climbing robots, but they still cannot adapt well torough or sloping walls. This paper proposes a 6-DOF (degree of freedom) humanoid wall-climbing robot (HWCR) based on the principle of negative pressure suction. HWCR has the advantages of flexible adsorption feet, strong adaptability, strong anti-subversion performance, and high friction to the wall. We deduce mechanics formulas and carry out a parametric design of the foot structure so that it can meet the requirement of robot wall climbing. We use Fluent to analyze the flow field of the adsorption foot and determine the motor speed that can provide a reliable adsorption force. Using the D-H matrix to plan gait, we also design a compound cycloid-based foot trajectory to reduce the impact between the HWCR and the wall. Experiments on the uneven wall and sloping wall show that the vehicle can walk with an ideal gait, and the resistance value of the servo on each joint is much lower than the critical value, which ensures the smooth movement of the HWCR.     

Shared human–robot path following control of an unmanned ground vehicle

This paper considers the shared path following control of an unmanned ground vehicle by a single person. A passive measure of human intent is used to blend the human and machine inputs in a mixed initiative approach. The blending law is combined with saturated super-twisting sliding mode speed and heading controllers, so that exogenous disturbances can be counteracted via equivalent control. It is proven that when the proposed blending law is used, the combined control signals from both the human and automatic controller respect the actuator magnitude constraints of the machine. To demonstrate the approach, shared control experiments are performed using an unmanned ground vehicle, which follows a lawn mower pattern shaped path.     

基于旋翼负压混合吸附的爬壁清洗机器人系统动力学性能研究

针对爬壁清洗机器人越障时,负压装置的吸附力下降导致吸附不稳定的问题,设计了一种旋翼负压混合吸附工作的多边形履带清洗机器人,并对爬行稳定性及越障性能进行了动力学分析。首先根据机器人爬壁的运动原理,建立机器人沿玻璃幕墙上的动力学模型,计算出电机理论驱动力矩;其次分析机器人在跨越障碍过程中的运动模型,结合与壁面接触的实际受力状态,对越障过程中关键阶段的本体倾翻、滑移两种失效形式进行运动学和动力学分析;然后根据玻璃幕墙实际的障碍高度,确定多边形履带的参数和理论驱动力矩的大小,并研制了实验样机进行爬行和越障试验,结果表明所设计的机器人具有良好的越障性能。     

新型树启发式搜索算法的机器人路径规划

面对三维空间移动机器人从起始点到终止点的最短路径问题,提出一种新型的边缘点树启发式搜索(TreeEP)算法,该方法将地图空间进行密度可调的三维离散化处理,根据障碍安全距离筛选出障碍物的可靠边缘点信息,再利用树扩散架构选出最能引导搜索方向的潜力点进行扩散搜索,最终得出最短路径。提出局部调整策略,得到改进的Tree-EP算法。实验结果表明,在带障碍复杂地形最短路径搜索应用中,提出的Tree-EP算法与已有方法相比,能找到更短的移动路径。     

基于机器视觉的机车齿轮毂全自动双轴拧紧机的设计和应用

设计了基于机器视觉的机车齿轮毂全自动双轴拧紧机,根据拧紧工艺和扭矩控制原理实现对螺栓拧紧力矩的控制;通过丝杠变径机构,实现不同规格齿轮毂螺栓拧紧;利用机器视觉实现螺栓位置的识别以及初始位置的确定;讨论了自动拧紧机控制系统的硬件组成和软件系统配置,并介绍了防错、防漏功能的设计流程。螺栓自动拧紧机可提高装配精度和操作效率,降低工人的劳动强度。     

Plant inspection by using a ground vehicle and an aerial robot: lessons learned from plant disaster prevention challenge in world robot summit 2018

Abstract

In recent years, to prevent accidents and disaster are desired by implementing maintenance and management of facilities, such as conducting periodic inspections with appropriate frequency at plants. However, because the dangerous materials such as flammable gas and explosives is used in a plant, and there are many dangerous places in a plant such as high-temperature environment and high places and narrow spaces, it is desirable to use a remote-controlled robot for safety work and short inspections. Against this background, the Disaster Robotics Category-Plant Disaster Prevention Challenge was held in Japan at the World Robot Summit 2018. Our team was ranked 3rd in this competition, because our strategy of ‘inspection and investigation in cooperation with UGV and UAV’ was effective. In this paper, the competition contents of World Robot Summit 2018 and the robot inspection system that we are studying are explained. And what kind of strategy was challenged and result for these given competition tasks by using our robot system are introduced. And the lessons learned such as advantages and issues in UGV and UAV collaboration work at this competition are described for evaluate a robot investigation system for disaster response and inspection work at plants.     

基于双层修正无迹卡尔曼的水下节点定位算法* .txt

摘要：针对水下无线传感网络中运动节点定位精度低的问题，提出了一种新的基于双层修正无迹卡尔曼的水下节点定位算法(DLMUKF)。该算法利用下层无迹卡尔曼滤波算法对节点状态进行预测，根据各信标节点的测距传播时延对预测的节点状态进行修正。运用上层无迹卡尔曼滤波算法对修正后的状态进行新的预测与修正。仿真实验中，DLMUKF算法的平均定位误差约为传统多边定位算法的15%，约为基于无迹卡尔曼滤波（UKF）定位算法的16%，受节点运动时间与速度的影响最小。通过实验证明DLMUKF算法能更充分利用实际距离值，可以有效减小运动节点的定位误差。 .txt     

一种液压摩擦焊机电液系统研究与试验

针对海上石油平台、海底输送管线维修的需要,提供了一种液压摩擦焊机液压和电器系统设计思路,通过参数计算、电液控制系统设计,研发了一种液压摩擦焊机,通过对DH38钢摩擦叠焊单元成型工艺试验,发现焊接接头拉伸强度达到了母材强度的76%以上,验证了液压摩擦焊机的可靠性能,通过该研究的应用,可对海上石油平台、海底输送管线的维修起到积极作用。     

Inverse reinforcement learning-based time-dependent A* planner for human-aware robot navigation with local vision

In an environment where robots coexist with humans, mobile robots should be human-aware and comply with humans' behavioural norms so as to not disturb humans' personal space and activities. In this work, we propose an inverse reinforcement learning-based time-dependent A* planner for human-aware robot navigation with local vision. In this method, the planning process of time-dependent A* is regarded as a Markov decision process and the cost function of the time-dependent A* is learned using the inverse reinforcement learning via capturing humans' demonstration trajectories. With this method, a robot can plan a path that complies with humans' behaviour patterns and the robot's kinematics. When constructing feature vectors of the cost function, considering the local vision characteristics, we propose a visual coverage feature for enabling robots to learn from how humans move in a limited visual field. The effectiveness of the proposed method has been validated by experiments in real-world scenarios: using this approach robots can effectively mimic human motion patterns when avoiding pedestrians; furthermore, in a limited visual field, robots can learn to choose a path that enables them to have the larger visual coverage which shows a better navigation performance.     

融合前沿研究的液体电介质击穿教学研究

针对《高电压与绝缘技术》课程中液体电介质的教学难点，提出了融合前沿研究的液体电介质击穿教学方法。基于前沿的液体放电应用背景与先进的液体放电研究平台，形象地展示液体电介质的动态击穿过程，在教学内容、教学方法、考核方式等方面进行科教融合改进，实施“以学生为中心”理念的课程教学设计。该教学方式取得了较好的教学效果，能够为其它知识点的教学质量提升提供参考。